SUNDOWN AUDIO | SA-2.75FR V2 | 4 OHMS (PAIR) – (30-WATTS)

Full-Range from ~300Hz on up (make sure to use an HPF filter on these).
These use a ferrite motor + neo pole cap, aluminum cone and dust cap, inverted rubbery surround, and custom tooled / vented stamped frame.
The SA-2.75FR is a direct factory replacement for 2.75″ speakers often found in the dash location of Chrysler and many other new vehicles.
It is a full-range driver and features a built-in crossover capacitor to block frequencies below 200Hz for systems where external crossovers are not available (OEM replacements). The motor is a Neo based design utilizing split-gap technology for reduced distortion. The cone is the same wool-filled paper as the SA component set topped off with an aluminum dust-cap to increase high-end extension. The surround is an inverted rubber design to assist in off-axis response.
The SA-2.75FR is rated for 30-watts of RMS power based on a strenuous 8-hour test. Our custom tooled 2.75″ frame features a vented spider plateau to help keep the voice coil cool. This power handling is increased by using a high-pass crossover.
RMS Power: 30-Watts per Side
1.5″ MOUNTING DEPTH