Mk1 & Mk2 Escort In Situ Adjustable Track Control Arm

In Situ adjustable TCA kit allows the Camber to be adjusted on the GRP4 Escort without having to remove the Bolts on the Cross Member.

The in situ design allows for very fine and accurate Camber adjustment.

Just loosen the 2 Lock nuts and turn the adjuster to adjust to your desired Camber setting.

Usually Camber setting are between -1.50 and -2.00 degrees depending on application and use.

The kit is supplied with Zinc plated High Tensile Steel Left hand thread adjusters and 1/2″ unf bolts and Rose joint spacers and Nyloc Nuts.

Fitted with Top Quality 5/8″ Teflon lined Rose joints.

Can be use in conjunction with Standard Anti roll bar or Compression Strut kit or Tension Strut kit.

Sold EACH.

Please select ‘Left Hand Side’ or ‘Right Hand Side’ from the options above.