Hubcentric Wheel Spacers Peugeot 4×108 – 65.1 bore 20mm

Pair of Hubcentric Wheel Spacers, suitable for Peugeot 4 stud and 8 extended wheel bolts.

NOT FOR ORIGINAL PEUGEOT WHEELS

Depth – 20mm

Total track widening – 40mm

PCD – 4×108

Centre bore – 65.1

Note – These are not applicable for original Peugeot or Citroen alloy wheels which require a bolt with a flat washer.

Kit contains – 2 x wheel spacers and 8 extended wheel bolts.

Hubcentric Wheel spacers are used to “space” the wheel out from the hub and are usually installed to give the car a wider track to fill the arches better for improved appearance.

However, wheel spacers come in two types, flat, and hub centric. Wide flat spacers should be avoided. Yes they are cheaper, but as they are flat, all the load of the car is held by the wheel bolts. Hub centric spacers have a lip in the centre similar to the one on the OEM hub. This lip bears the weight as the original hub would, not the bolts, eliminating steering shakes. Hub centric spacers are therefore much safer. Spacers less than 10mm are usually flat, but wider than 10mm, we recommend always using hub centric spacers.

No returns on hardware that has been fitted. In the event an item has been returned and has signs of being fitted to a vehicle, we reserve the right to deny and refund.