INCRIMINATOR AUDIO | IX1.1 |MONO BLOCK AMPLIFIER

We just reset the whole compact monoblock amplifier market with our new IX monos. That all starts with the IX1.1. You have less than a square foot to work with and you need a strong amp? We have you covered, at less than 10 long, the all new IX1.1 pours out 1200 watts at 1ohm mono (or 800 at 2 ohms) with ease. What that means, is you have power to spare to run a pair of quality subs or a single sub that needs over 1000 watts to get going. This would be a perfect mate to a Lethal Injection subwoofer.
Running more than one powerful sub, but pinched on amp space? You can run multiple IX1.1s in master/slave mode to keep the power on tap you need, while looking good doing it. All you would need to do is flip a switch and you will have your amps strapped and working as a team.
Employing our multi-layer protection circuitry as well as a heavy duty, double sided PCB, you can relax knowing you will have years of reliable performance from a quality amplifier. With a built-in, adjustable subsonic filter, you can relax knowing your subwoofer will be protected too. With a high dampening factor as well as high signal to noise ratio, you will have excellent sound going to your subs from the entire IX line up.

Features

Digital Class-D Mono Block Amplifier
Dual MOS-FET Pulse Width Modulation Power Supply
1 Ohm Topology
24 dB/octave – Variable State Subsonic Filter
24 dB/octave – Variable State Low Pass Filter
9 dB/octave – Variable State Bass Boost
Heavy Duty Copper Layer Double Sided Epoxy PCB
Advanced Strapping with Mirror Techology
Multi-Layer Bullet Proof Protection Circuit (Themal, Voltage, Speaker Short, DC)
Wired Remote Control with Clipping Indicator

Specifications

Rated Power ( 14.4V at 1% THD )
IX1.1

RMS Power – 2 Ohm Linked :
2400W

RMS Power – 1 Ohm Mono :
1200W

RMS Power – 2 Ohm Mono :
800W

RMS Power – 4 Ohm Mono :
400W

Low Pass Filter ( 24dB/Oct. ) :
35Hz – 250Hz

Subsonic Filter ( 24dB/Oct. ) :
10Hz – 50Hz

Frequency Response ( +/- 1dB ) :
12Hz – 250Hz

Bass Boost ( 45Hz ) :
0 – 9dB

Input Sensitivity ( Volt +/- 5% ) :
6.0V – 0.2V

Signal / Noise Ratio :
95dB

Dampening Factor ( 1 Ohm ) :
200 +

Master/Slave/Mirror :
Included

Power Efficiency ( 4 Ohm ) :
94%

Fuse Rating ( 14.4V ) :
120A

Fuse Rating ( 14.4V Linked ) :
240A

Segmented Power Input Connection :
4 AWG

Operation Voltage :
8.5V – 16.0V

Speaker Output Connection :
8 AWG

Dimensions ( Inches ) :
7.48 W x 2.24 H x 9.84 L

Dimensions ( Millimeters ) :
190 W x 57 H x 250 L