J&L Oil Separator 3.0 Passenger Side (2021.5-2023 Ford Bronco 2.3L EcoBoost)

2021.5-2022 Ford Bronco 2.3L Ecoboost

**Please note, Ford changed the PCV line location in the middle of the 2021 model year. This kit only fits the later year change. We believe the change happened in 10/21 build dates. Please check over the install directions and compare to your own Bronco if you have a 2021! There is a picture above that circles this lines location!

If you have the early model use this onehttps://www.pandamotorworks.com/products/j-l-21-21-5-ford-bronco-2-3l-ecoboost-passenger-side-3-0-oil-separator

J&L 3.0 Oil Separator

3oz Capacity
Solid billet construction.
Plug-N-Play Design
Multi stage filter system designed to collect the finest of vapors and drop them into the easily removable bottom while allowing clean air to pass through to the intake.

How does it work?

During the process of venting crankcase pressure back through your intake track, large amounts of oil, in the form of vapors can gather/accumulate in your intake tube, intake manifold runners and even dilute your gas, lowering its octane level. This happens on all engines and is even worse with forced inducted vehicles (supercharged and turbocharged) as crankcase pressures are increased. To combat this, we have developed an oil separator of our own design. Milled from solid billet aluminum this is a rock-solid piece. It has a knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks.

Filtering consists of a fine mesh stainless steel screen that traps fine oil vapors and releases them once heavy enough to fall. They then pass through a 1/2″ thick 1/16th” aluminum honeycomb filter where they grow every larger and then fall into the bottom. By the time the oil gets through the filter it’s too heavy to be passed on into the intake. The tank holds 3 oz of fluid, while that may not sound like a lot, you shouldnt see that much oil in your PCV system. Drain it every 2000-3000 miles and you will never come close to filling it.

WHY J&L?
Our kits are easy install, service and flat out work! Many kits use OEM hoses or come complete with all hoses, custom brackets and hardware for an OEM look. Retain stock hose if you ever return to stock.