PandaScan Remote OBD2 Configuration Service – 2020+ Explorer ST

The Ford Explorer ST is an amazing vehicle out of the box, but there are some features that you just can’t get on every model: UNTIL NOW! PandaScan is a unique service offered by Panda Motorworks that helps you unlock the hidden features of your Explorer ST!

Changes We Can Make Include:

-Deactivating AutoStart/stop (2021-2024 only)

-Enabling Bambi Mode (Fog Lights Remain on when High Beams are switched on)

-Eliminate Double Honk (disables double honk when exiting the vehicle with the key and it running)

-Remove fake engine noise

-Turn Signal Volume

-DRLs – full brightness

-Tire Size Recalibration

-Prevent headlamp from defaulting to the “Auto” position

-Keyfob Panic Alarm (Disabled, Enabled (2 press), Enabled (1 press))

-Disable auto idle shutdown of 30 minutes (2020-2024 only)

-Sets DRL to amber turns only (DRL in amber LED bars)

-PowerPoint time-out disable (This will disable the timeout, be aware it will be constantly powered and can deplete battery)

-Front Turn Bulb Outage Detection (2021-2024)

– Rear Turn Bulb Outage Detection (2021-2024)

If you have another one you are interested in, reach out to [email protected], and we will see if we can do it for you.

We at Panda Motorworks have been modifying and tuning Ford vehicles for nearly a decade and have a wealth of knowledge and experience when it comes to Ford Electronics! Entrust your vehicle with the calibration experts at Panda Motorworks for your OBD2 Configuration!

What’s Included With Your PandaScan Service?

Each PandaScan purchase includes one of our calibrators to remote into your laptop and perform 3 reconfigurations of your choice! Additional reconfigurations can be purchased A La Carte for a small fee.

What To Expect

By purchasing the PandaScan service you will be connected directly with a Panda Motorworks Calibrator via email, where information will be verified. Once everything is in place, you will be able to schedule your PandaScan Service with a calibrator to have the calibrations performed LIVE!

What’s Needed To Complete Service

–ELM327 Connector: Can be purchased Here

–Windows Laptop w/TeamViewer & FORScan